# Makefile.in generated by automake 1.6.3 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# Makefile for popt library.
SHELL = /bin/sh

srcdir = ../popt
top_srcdir = ../popt
VPATH = ../popt
prefix = /usr/local
exec_prefix = ${prefix}

bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
pkgdatadir = $(datadir)/popt
pkglibdir = $(libdir)/popt
pkgincludedir = $(includedir)/popt
top_builddir = .

ACLOCAL = ${SHELL} /files/abiword-2.2.8/popt/missing --run aclocal-1.6
AUTOCONF = ${SHELL} /files/abiword-2.2.8/popt/missing --run autoconf
AUTOMAKE = ${SHELL} /files/abiword-2.2.8/popt/missing --run automake-1.6
AUTOHEADER = ${SHELL} /files/abiword-2.2.8/popt/missing --run autoheader

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /bin/install -c
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA = ${INSTALL} -m 644
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = ${INSTALL}
INSTALL_HEADER = $(INSTALL_DATA)
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = 
build_triplet = i586-pc-beos
host_alias = 
host_triplet = i586-pc-beos
target_alias = 
target_triplet = i586-pc-beos

EXEEXT = 
OBJEXT = o
PATH_SEPARATOR = :
AMTAR = ${SHELL} /files/abiword-2.2.8/popt/missing --run tar
AS = @AS@
AWK = gawk
BUILD_INCLUDED_LIBINTL = yes
CATOBJEXT = .gmo
CC = gcc
CPP = gcc -E
DATADIRNAME = share
DEPDIR = .deps
DLLTOOL = @DLLTOOL@
ECHO = echo
GENCAT = gencat
GLIBC21 = no
GMSGFMT = /boot/home/config/bin/msgfmt
HAVE_LIB = @HAVE_LIB@
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
INSTOBJEXT = .mo
INTLBISON = bison
INTLLIBS = ${top_builddir}/intl/libintl.a 
INTLOBJS = $(GETTOBJS)
INTL_LIBTOOL_SUFFIX_PREFIX = 
LIB = @LIB@
LIBICONV = 
LIBINTL = ${top_builddir}/intl/libintl.a 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIB = @LTLIB@
LTLIBICONV = 
LTLIBINTL = ${top_builddir}/intl/libintl.a 
MKINSTALLDIRS = ../popt/mkinstalldirs
OBJDUMP = @OBJDUMP@
PACKAGE = popt
POPT_SOURCE_PATH = /files/abiword-2.2.8/popt
POSUB = po
RANLIB = ranlib
STRIP = strip
TARGET = depend allprogs
U = 
USE_INCLUDED_LIBINTL = yes
USE_NLS = yes
VERSION = 1.7
am__include = include
am__quote = 
install_sh = /files/abiword-2.2.8/popt/install-sh

AUTOMAKE_OPTIONS = 1.4 foreign

EXTRA_DIST = autogen.sh CHANGES $(man_MANS) popt.spec \
	testit.sh test-poptrc \
	po/*.in po/*.po po/popt.pot \
	popt.ps


SUBDIRS = intl po

INCLUDES = -I. -I$(top_srcdir)

noinst_HEADERS = findme.h poptint.h system.h

noinst_PROGRAMS = test1 test2 test3
test1_SOURCES = test1.c
test1_LDFLAGS = -all-static
test1_LDADD = $(lib_LTLIBRARIES)
test2_SOURCES = test2.c
test2_LDFLAGS = -all-static
test2_LDADD = $(lib_LTLIBRARIES)
test3_SOURCES = test3.c
test3_LDFLAGS = -all-static
test3_LDADD = $(lib_LTLIBRARIES)

noinst_SCRIPTS = testit.sh

TESTS_ENVIRONMENT = \
test1="./test1"


TESTS = testit.sh

include_HEADERS = popt.h
lib_LTLIBRARIES = libpopt.la
libpopt_la_SOURCES = popt.c findme.c poptparse.c poptconfig.c popthelp.c

man_MANS = popt.3

CVSTAG = $(PACKAGE)-$(subst .,_,$(VERSION))
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = Doxyfile intl/Makefile
LTLIBRARIES = $(lib_LTLIBRARIES)

libpopt_la_LDFLAGS =
libpopt_la_LIBADD =
am_libpopt_la_OBJECTS = popt.lo findme.lo poptparse.lo poptconfig.lo \
	popthelp.lo
libpopt_la_OBJECTS = $(am_libpopt_la_OBJECTS)
noinst_PROGRAMS = test1$(EXEEXT) test2$(EXEEXT) test3$(EXEEXT)
PROGRAMS = $(noinst_PROGRAMS)

am_test1_OBJECTS = test1.$(OBJEXT)
test1_OBJECTS = $(am_test1_OBJECTS)
test1_DEPENDENCIES = libpopt.la
am_test2_OBJECTS = test2.$(OBJEXT)
test2_OBJECTS = $(am_test2_OBJECTS)
test2_DEPENDENCIES = libpopt.la
am_test3_OBJECTS = test3.$(OBJEXT)
test3_OBJECTS = $(am_test3_OBJECTS)
test3_DEPENDENCIES = libpopt.la
SCRIPTS = $(noinst_SCRIPTS)


DEFS = -DHAVE_CONFIG_H
DEFAULT_INCLUDES =  -I. -I$(srcdir) -I.
CPPFLAGS = 
LDFLAGS = 
LIBS = 
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
DEP_FILES = ./$(DEPDIR)/findme.Plo ./$(DEPDIR)/popt.Plo \
	./$(DEPDIR)/poptconfig.Plo ./$(DEPDIR)/popthelp.Plo \
	./$(DEPDIR)/poptparse.Plo ./$(DEPDIR)/test1.Po \
	./$(DEPDIR)/test2.Po ./$(DEPDIR)/test3.Po
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
	$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
CFLAGS = -Wall -g -O2
DIST_SOURCES = $(libpopt_la_SOURCES) $(test1_SOURCES) $(test2_SOURCES) \
	$(test3_SOURCES)

NROFF = nroff
MANS = $(man_MANS)
HEADERS = $(include_HEADERS) $(noinst_HEADERS)


RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
	uninstall-info-recursive all-recursive install-data-recursive \
	install-exec-recursive installdirs-recursive install-recursive \
	uninstall-recursive check-recursive installcheck-recursive
DIST_COMMON = README $(include_HEADERS) $(noinst_HEADERS) ABOUT-NLS \
	COPYING Doxyfile.in Makefile.am Makefile.in aclocal.m4 \
	config.guess config.h.in config.sub configure configure.in \
	depcomp install-sh ltmain.sh missing mkinstalldirs
DIST_SUBDIRS = $(SUBDIRS)
SOURCES = $(libpopt_la_SOURCES) $(test1_SOURCES) $(test2_SOURCES) $(test3_SOURCES)

all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj

am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)

$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck
$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

$(ACLOCAL_M4):  configure.in 
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h

$(srcdir)/config.h.in:  $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOHEADER)
	touch $(srcdir)/config.h.in

distclean-hdr:
	-rm -f config.h stamp-h1
Doxyfile: $(top_builddir)/config.status Doxyfile.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
libLTLIBRARIES_INSTALL = $(INSTALL)
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(libdir)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    f="`echo $$p | sed -e 's|^.*/||'`"; \
	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
	  else :; fi; \
	done

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	    p="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
	  $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
	done

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test -z "$dir" && dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libpopt.la: $(libpopt_la_OBJECTS) $(libpopt_la_DEPENDENCIES) 
	$(LINK) -rpath $(libdir) $(libpopt_la_LDFLAGS) $(libpopt_la_OBJECTS) $(libpopt_la_LIBADD) $(LIBS)

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  echo " rm -f $$p $$f"; \
	  rm -f $$p $$f ; \
	done
test1$(EXEEXT): $(test1_OBJECTS) $(test1_DEPENDENCIES) 
	@rm -f test1$(EXEEXT)
	$(LINK) $(test1_LDFLAGS) $(test1_OBJECTS) $(test1_LDADD) $(LIBS)
test2$(EXEEXT): $(test2_OBJECTS) $(test2_DEPENDENCIES) 
	@rm -f test2$(EXEEXT)
	$(LINK) $(test2_LDFLAGS) $(test2_OBJECTS) $(test2_LDADD) $(LIBS)
test3$(EXEEXT): $(test3_OBJECTS) $(test3_DEPENDENCIES) 
	@rm -f test3$(EXEEXT)
	$(LINK) $(test3_LDFLAGS) $(test3_OBJECTS) $(test3_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT) core *.core

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/findme.Plo
include ./$(DEPDIR)/popt.Plo
include ./$(DEPDIR)/poptconfig.Plo
include ./$(DEPDIR)/popthelp.Plo
include ./$(DEPDIR)/poptparse.Plo
include ./$(DEPDIR)/test1.Po
include ./$(DEPDIR)/test2.Po
include ./$(DEPDIR)/test3.Po

distclean-depend:
	-rm -rf ./$(DEPDIR)

.c.o:
	source='$<' object='$@' libtool=no \
	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
	$(CCDEPMODE) $(depcomp) \
	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<

.c.obj:
	source='$<' object='$@' libtool=no \
	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
	$(CCDEPMODE) $(depcomp) \
	$(COMPILE) -c `cygpath -w $<`

.c.lo:
	source='$<' object='$@' libtool=yes \
	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' \
	$(CCDEPMODE) $(depcomp) \
	$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
CCDEPMODE = depmode=gcc

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

man3dir = $(mandir)/man3
install-man3: $(man3_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man3dir)
	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.3*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    3*) ;; \
	    *) ext='3' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst; \
	done
uninstall-man3:
	@$(NORMAL_UNINSTALL)
	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.3*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man3dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man3dir)/$$inst; \
	done
includeHEADERS_INSTALL = $(INSTALL_HEADER)
install-includeHEADERS: $(include_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(includedir)
	@list='$(include_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \
	  $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \
	done

uninstall-includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(include_HEADERS)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f $(DESTDIR)$(includedir)/$$f"; \
	  rm -f $(DESTDIR)$(includedir)/$$f; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

ETAGS = etags
ETAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH

check-TESTS: $(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; \
	srcdir=$(srcdir); export srcdir; \
	list='$(TESTS)'; \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *" $$tst "*) \
	        xpass=`expr $$xpass + 1`; \
	        failed=`expr $$failed + 1`; \
	        echo "XPASS: $$tst"; \
	      ;; \
	      *) \
	        echo "PASS: $$tst"; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *" $$tst "*) \
	        xfail=`expr $$xfail + 1`; \
	        echo "XFAIL: $$tst"; \
	      ;; \
	      *) \
	        failed=`expr $$failed + 1`; \
	        echo "FAIL: $$tst"; \
	      ;; \
	      esac; \
	    fi; \
	  done; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="All $$all tests passed"; \
	    else \
	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all tests failed"; \
	    else \
	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
	    fi; \
	  fi; \
	  dashes=`echo "$$banner" | sed s/./=/g`; \
	  echo "$$dashes"; \
	  echo "$$banner"; \
	  echo "$$dashes"; \
	  test "$$failed" -eq 0; \
	else :; fi
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = .
distdir = $(PACKAGE)-$(VERSION)

am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }

GZIP_ENV = --best
distcleancheck_listfiles = find . -type f -print

distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	$(mkinstalldirs) $(distdir)/. $(distdir)/intl $(distdir)/po
	@list='$(DISTFILES)'; for file in $$list; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$(top_distdir)" \
	        distdir=../$(distdir)/$$subdir \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist dist-all: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	$(am__remove_distdir)
	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
	  && cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	    --with-included-gettext \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
	      || { echo "ERROR: files left after uninstall:" ; \
	           find $$dc_install_base -type f -print ; \
	           exit 1; } >&2 ) \
	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
	  && rm -f $(distdir).tar.gz \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@echo "$(distdir).tar.gz is ready for distribution" | \
	  sed 'h;s/./=/g;p;x;p;x'
distcleancheck: distclean
	if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) \
		$(HEADERS) config.h
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(man3dir) $(DESTDIR)$(includedir)

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
	clean-noinstPROGRAMS mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
distclean-am: clean-am distclean-compile distclean-depend \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am: install-includeHEADERS install-man

install-exec-am: install-libLTLIBRARIES

install-info: install-info-recursive

install-man: install-man3

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf autom4te.cache
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

uninstall-am: uninstall-includeHEADERS uninstall-info-am \
	uninstall-libLTLIBRARIES uninstall-man

uninstall-info: uninstall-info-recursive

uninstall-man: uninstall-man3

.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-TESTS check-am \
	clean clean-generic clean-libLTLIBRARIES clean-libtool \
	clean-noinstPROGRAMS clean-recursive dist dist-all dist-gzip \
	distcheck distclean distclean-compile distclean-depend \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-recursive distclean-tags distcleancheck distdir dvi \
	dvi-am dvi-recursive info info-am info-recursive install \
	install-am install-data install-data-am install-data-recursive \
	install-exec install-exec-am install-exec-recursive \
	install-includeHEADERS install-info install-info-am \
	install-info-recursive install-libLTLIBRARIES install-man \
	install-man3 install-recursive install-strip installcheck \
	installcheck-am installdirs installdirs-am \
	installdirs-recursive maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
	tags tags-recursive uninstall uninstall-am \
	uninstall-includeHEADERS uninstall-info-am \
	uninstall-info-recursive uninstall-libLTLIBRARIES uninstall-man \
	uninstall-man3 uninstall-recursive


#BUILT_SOURCES = popt.lcd

popt.lcd: Makefile.am ${libpopt_la_SOURCES} ${include_HEADERS} ${noinst_HEADERS}
	lclint -dump $@ ${libpopt_la_SOURCES}

.PHONY:	sources
sources:
	@echo $(libpopt_la_SOURCES:%=popt/%)

.PHONY: lclint
lclint:
	lclint ${DEFS} ${INCLUDES} test1.c ${libpopt_la_SOURCES}

.PHONY: archive
archive: 
	@echo "This is $(PACKAGE)-$(VERSION)."
	@sleep 5
	@cvs -Q tag -F $(CVSTAG) .
	@rm -rf /tmp/$(PACKAGE)-$(VERSION) /tmp/$(PACKAGE)
	@cd /tmp; cvs -Q -d $(CVSROOT) export -r$(CVSTAG) $(PACKAGE) || :
	@mv /tmp/$(PACKAGE) /tmp/$(PACKAGE)-$(VERSION)
	@cd /tmp/$(PACKAGE)-$(VERSION); ./autogen.sh ; make depend; make distclean
	@cd /tmp/$(PACKAGE)-$(VERSION); ./autogen.sh --noconfigure
	@cd /tmp; tar czSpf $(PACKAGE)-$(VERSION).tar.gz $(PACKAGE)-$(VERSION)
	@rm -rf /tmp/$(PACKAGE)-$(VERSION)
	@cp /tmp/$(PACKAGE)-$(VERSION).tar.gz .
	@rm -f /tmp/$(PACKAGE)-$(VERSION).tar.gz 
	@echo " "
	@echo "The final archive is ./$(PACKAGE)-$(VERSION).tar.gz."

.PHONY: doxygen
doxygen: Doxyfile
	rm -rf doxygen
	mkdir -p doxygen
	doxygen
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
